BLT Pixels - 12v Resistor xConnect Bullets

The BLT pixel is our take on the common, 12v bullet pixel with a few optimizations.

First, our BLT's operate at a lower wattage - .3w, compared to the .6w that most "signage" pixels operate at.  Any vendor selling pixels should have the wattage on their description page, if not....you probably shouldn't buy from them!

Why .3w?  Most vendors sell .6w pixels, and then people run them at 50% in their shows.  Why do that, when you can just run it at .3w at full, save energy, and run longer strings of pixels before you run out.

What else matters?  We ONLY use fire-resistant epoxy, UV-protected plastics, and 18awg wire.  These are resistor-based pixels.

Our quality control process both in the factory and in the US ensures that pixels are built to last - and covered by our 2-year warranty.

Specs:

• Voltage - 12v
• Max wattage - .3w per pixel, 30w per 
• Connector - xConnect
• Waterproof Rating - IP67
• Weight - 1.8lbs/100 count, .9lbs/50ct
• Spacing - 10cm (approx 4 inch) and 15cm xConnect tails at each end
• Warranty - 2 Year/Repair Kit: https://aboveavl.com/pages/pixel-warranty