-
Media gallery Media gallery -
Media gallery Media gallery -
Media gallery Media gallery -
Media gallery Media gallery -
Media gallery Media gallery -
Media gallery Media gallery -
Media gallery Media gallery -
Media gallery Media gallery
CDi4x300BL
- Regular price
- $2,886.00
- Regular price
-
- Sale price
- $2,886.00
- Unit price
- / per
Usually ships in 1-3 business days. Fill out a quote request and we'll check if it's backordered!
Description
Description
The CDi4x300BL is an analog, 4 channel speaker amplifier that provides high quality audio in small-medium sized installs.
From the Manufacturer:
The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|300 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 4|300 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
Features
-
DriveCore Technology
-
Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.
-
Network Control and Monitoring
-
Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
-
DSP -On-board Digital Signal Processor in each amplifier allows for custom configuration
-
Input Router
-
Input Delay – Up to 1000ms
-
Input Parametric EQ – 8 band
-
Crossover
-
Output Parametric EQ – 8 band
-
Output Delay – Up to 100ms
-
LevelMAX™ Limiter
-
BLU link (BL models only)
-
Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link
-
Direct Drive 70/100Vrms Output
-
Each output channel is capable of provide either 70V or 100V for high impedance applications.
-
Front-Panel Interface
-
Completely configure the amplifier using an intuitive front-panel interface.
-
GPIO/AUX Port
-
Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.
Specifications:
-
BLU link
-
No
-
Channels
-
4
-
Sensitivity (for full rated power at 8 ohms)
-
0.7V RMS
-
Rated Power Output (per channel @ 4 ohms)
-
300W
-
Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms)
-
> 104dB
-
THD (full rated power, 20 Hz - 20 kHz)
-
0.35%
-
Damping Factor (20 Hz to 100 Hz)
-
> 1000
-
Frequency Response (8Ω, 20 Hz - 20 kHz)
-
+/-0.5dB
-
Crosstalk (below rated power) 20 Hz to 1 kHz
-
> 80dB
-
Input Impedance (nominally balanced, nominally unbalanced)
-
20 kΩ balanced, 10 kΩ unblanced
-
Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion) 1
-
9 x 3.5 x 12.25
-
Weight
-
16.13 lbs (7.31 kg)
-
Power Supply Connector
-
Standard IEC type 320 inlet for detachable connector 100 – 240V~
Tech Specs
Have a question?
Notified by email when this product becomes available
$2,886.00
Recommended products
Recently viewed products
Subscribe to our emails
Be the first to know about new collections and exclusive offers.