FXD500.8
Usually ships in 1-3 business days. Fill out a quote request and we'll check if it's backordered!
Description
Description
The Ashly FXD500.8 is an eight-channel, 4,000W Class-D power amplifier designed for demanding professional audio installations. Delivering up to 500W per channel into 2Ω or 4Ω loads, it combines integrated DSP, Dante audio networking and flexible loudspeaker configuration in a 2U rackmount chassis. It supports low-impedance operation and bridged 70V/100V distributed audio applications.
From The Manufacturer:
The Ashly FXD Series combines high-efficiency Class-D amplification with integrated digital signal processing and Dante audio-over-IP networking.
The FXD500.8 provides eight amplifier output channels and eight analogue input channels, making it suitable for complex multi-zone audio installations. Its integrated DSP provides comprehensive signal processing, including equalisation, crossover, FIR filters, compression, limiting, polarity adjustment and delay.
The amplifier features 4×4 Dante audio networking, Ethernet connectivity and a built-in Wi-Fi access point. Its browser-based configuration interface allows technicians to configure routing, processing and amplifier settings from a computer or mobile device.
Key Features:
-
Eight-channel Class-D power amplifier.
-
500W per channel at 2Ω and 4Ω.
-
250W per channel at 8Ω.
-
4,000W total rated amplifier output.
-
Four bridged output pairs, each delivering up to 1,000W.
-
Supports low-impedance and high-impedance loudspeaker systems.
-
70V and 100V bridged output configurations.
-
Integrated 4×4 Dante audio networking.
-
Advanced integrated DSP on inputs and outputs.
-
Parametric EQ, crossover, FIR filters, compression and limiting.
-
Built-in Wi-Fi access point.
-
Ethernet connectivity for network integration.
-
Browser-based configuration interface.
-
Balanced microphone/line inputs on removable Euroblock connectors.
-
Unbalanced RCA inputs.
-
Stereo S/PDIF digital audio input and output.
-
GPIO connectivity for external control.
-
Automatic and manual power-saving modes.
-
Full-rack, 2U construction.
Specifications:
-
Manufacturer: Ashly Audio
-
Model: FXD500.8
-
Amplifier Class: Class D
-
Amplifier Channels: 8
-
Total Rated Output: 4,000W
-
Output Power at 2Ω: 8 × 500W
-
Output Power at 4Ω: 8 × 500W
-
Output Power at 8Ω: 8 × 250W
-
Bridged Output: 4 × 1,000W
-
70V Output: 4 × 1,000W bridged
-
100V Output: 4 × 1,000W bridged
-
Dante Networking: 4×4 Dante audio I/O.
-
Analogue Inputs: 8 input channels.
-
Analogue Connections: Balanced microphone/line Euroblock and unbalanced RCA.
-
Digital Audio: Stereo S/PDIF input and output.
-
Network Connectivity: Ethernet and built-in Wi-Fi access point.
-
Control Interface: Browser-based configuration.
-
DSP: Integrated input, zone, output and speaker processing.
-
Frequency Response: 20Hz–20kHz (+0/−0.5dB).
-
Signal-to-Noise Ratio: Greater than 108dB, A-weighted.
-
THD+N: Less than 0.05%.
-
Power Sharing: Not supported on the FX500 models.
-
Protection: Short circuit, output DC, undervoltage, temperature and overload protection.
-
Rack Format: Full-rack, 2U.
Included:
-
One Ashly FXD500.8 power amplifier.
-
Mains power cable.
-
Analogue input Euroblock connectors.
-
GPIO connection connector.
-
Speaker output connection connectors.
-
Product documentation.
Applications:
-
Dante-enabled commercial audio installations.
-
Theatre and auditorium sound systems.
-
Distributed 70V and 100V loudspeaker systems.
-
Hospitality and retail audio.
-
Networked multi-zone audio distribution.
-
Educational and institutional facilities.
-
Large-scale background music systems.
-
Professional fixed-installation sound reinforcement.
-
Multi-channel loudspeaker installations.
Included Accessories:
-
Mains power cable.
-
Analogue input Euroblock connectors.
-
GPIO connection connector.
-
Speaker output connection connectors.
-
Rack mounting hardware.
Accessories (Not Included):
-
Dante-compatible network switch.
-
Ethernet network cables.
-
Ashly WR-1 or WR-1.1 remote volume controllers.
-
External control equipment.
-
Loudspeaker cables and connectors.
-
Additional audio processing equipment, where required.
Size:
-
Width: 483mm
-
Depth: 414mm
-
Height: 89mm
-
Rack Format: Full-rack, 2U.
Weight:
-
Net Weight: 11.6kg (25.6lb).
Electrical/Thermal:
-
Operating Voltage: 100–240V AC.
-
Operating Frequency: 50–60Hz.
-
Standby Power Consumption: Less than 0.5W.
-
Operational Power Consumption: Approximately 758W at 1/8 full power, 2Ω load.
-
Thermal Output: Approximately 880 BTU/hr at 1/8 full power, 2Ω load.
-
Power Supply: Universal switch-mode power supply with Power Factor Correction (PFC).
-
Cooling: Fan-cooled.
-
Operating Temperature: Indoor professional installation; confirm permitted ambient range in the operating manual.
-
Installation Environment: Professional indoor audio installations.

Have a question?
Notified by email when this product becomes available
$3,999.00
Recommended products
Recently viewed products
Subscribe to our emails
Be the first to know about new collections and exclusive offers.




