FXD750.4
Usually ships in 1-3 business days. Fill out a quote request and we'll check if it's backordered!
Description
Description
The Ashly FXD750.4 is a four-channel Class-D power amplifier delivering up to 750W per channel at 2Ω or 4Ω. Part of Ashly’s FXD Series, it combines advanced onboard DSP, 4×4 Dante audio networking, built-in Wi-Fi and browser-based configuration in a 2U rackmount chassis. Its flexible output configuration supports low-impedance operation as well as bridged 70V and 100V distributed audio systems.
From The Manufacturer:
The FXD Series brings the power and flexibility of Ashly’s FX platform into networked audio environments. With 4×4 Dante audio-over-IP connectivity, FXD amplifiers provide high-quality, low-latency audio distribution while retaining intelligent DSP, browser-based control and built-in Wi-Fi.
Key Features:
-
Four-channel Class-D power amplifier.
-
750W per channel at 2Ω and 4Ω.
-
400W per channel at 8Ω.
-
Bridged output configurations for 70V and 100V systems.
-
Integrated 4×4 Dante audio-over-IP connectivity.
-
Built-in Wi-Fi access point and Ethernet networking.
-
Browser-based configuration interface; no dedicated software installation required.
-
Advanced DSP processing for inputs, zones, outputs and speaker processing.
-
Dynamic Power Sharing.
-
Front-panel status indicators for amplifier, input, output and network.
-
Auto and manual power-saving modes.
-
GPIO, standby/mute and remote volume-control connections.
Specifications:
-
Manufacturer: Ashly.
-
Model: FXD750.4.
-
Amplifier Class: Class D.
-
Number of Channels: 4.
-
Output Power at 2Ω: 4 × 750W.
-
Output Power at 4Ω: 4 × 750W.
-
Output Power at 8Ω: 4 × 400W.
-
Bridged Output at 70V: 2 × 1,200W.
-
Bridged Output at 100V: 2 × 1,500W.
-
Total System Power: 3,000W.
-
Dante Connectivity: 4 × 4 Dante I/O.
-
Analogue Inputs: Balanced microphone/line inputs and unbalanced RCA inputs.
-
Digital Audio: 2-channel S/PDIF input and output.
-
Network Connectivity: Ethernet and built-in Wi-Fi.
-
DSP: Integrated input, zone, output and speaker processing.
-
Frequency Response: 20Hz–20kHz (+0/−0.5dB, 8Ω load, 3dB below rated power).
-
Signal-to-Noise Ratio: Greater than 108dB, A-weighted.
-
THD+N: Less than 0.05%.
-
Cooling: Variable-speed fan cooling.
-
Rack Format: 2U.
Included:
-
Ashly FXD750.4 amplifier.
-
Standard power and connection accessories supplied with the unit should be confirmed with the supplier.
Applications:
-
Commercial sound installations.
-
Multi-zone audio distribution.
-
Large venues and auditoriums.
-
Hospitality and entertainment facilities.
-
Distributed 70V and 100V loudspeaker systems.
-
Networked audio installations using Dante.
-
Professional fixed-installation sound systems.
Included Accessories:
-
Not independently verified.
Accessories (Not Included):
-
External Dante network infrastructure, where required.
-
Compatible rack installation hardware.
-
External control devices and network equipment, where required.
-
Compatible loudspeakers and speaker cabling.
Size:
-
482.6 × 320 × 88.9mm (L × W × H).
-
Rack Height: 2U.
Weight:
-
7.48kg (manufacturer-listed weight: 16.5lb).
Electrical/Thermal:
-
Operating Voltage: 100–240V AC.
-
Operating Frequency: 50/60Hz.
-
Standby Power Consumption: 0.5W.
-
Typical Power Consumption: 1,100W.
-
Operating Temperature: 0–40°C.
-
Protection: Short-circuit, DC fault, undervoltage, thermal and overload protection.

Have a question?
Notified by email when this product becomes available
$2,699.00
Recommended products
Recently viewed products
Subscribe to our emails
Be the first to know about new collections and exclusive offers.




