MULTIVERSE RECEIVER CARD, 2.4GHz / 900MHz

The City Theatrical Multiverse Receiver Card is a full Multiverse wireless DMX/RDM receiver, without housing, for adding wireless DMX/RDM to props, costumes, and lighting fixtures.

From the Manufacturer

City Theatrical's Multiverse® Receiver Cards are products that any lighting user can use to implement wireless DMX/RDM into entertainment projects or lighting equipment in a simple way. Multiverse Receiver Cards are full Multiverse wireless DMX/RDM receivers without the housing, XLR connectors, and user interface as used in wireless DMX receiving products like the Multiverse Node and Multiverse SHoW Baby. They include an internal antenna and a connection to an optional external antenna. Configuration is done via RDM with the DMXcat® Multi Function Test Tool, or with City Theatrical's USB Configuration Program for PC/Mac.

While Multiverse Modules require a full circuit board level implementation by professional lighting manufacturers, Multiverse Receiver Cards can be used by any lighting user to implement wireless DMX/RDM into their lighting equipment, whether props, costumes, or lighting fixtures. Multiverse Receiver Cards can be used as part of a full Multiverse wireless DMX/RDM system to connect up to 10 universes of wireless DMX/RDM to a single Multiverse Transmitter. Lighting manufacturers can use the 0-10V and PWM output capabilities to quickly add wireless DMX control to their products.

Packaging Options

• 2.4GHz (P/N 5906): 2.4GHz radio, for use worldwide.
• 900MHz (P/N 5907): 900MHz radio. The 900MHz band is licensed for use in North America only.

Features

• Supports ANSI E1.11 DMX512-A and E1.20 RDM
• DMX RS-485 driver on board with ±60V protection
• Signal Quality LEDs on board and external connections
• SHoW ID RGB LED on board and external connections
• Multiverse Band LED on board and external connections
• Wide input voltage range, 5V to 30Vdc
• Footprint 50mm (2") x 38mm (1.5")
• +3.3Vdc output to power low current hosts
• Configurable over USB micro B connector
• Firmware updatable over USB micro B connector
• Advanced Mode features: 0-10V output and four PWM control outputs
• No special engineering or programming skills needed to implement; basic hand soldering skills only
• Recommended use: Adding wireless DMX/RDM to props, costumes, lighting fixtures, and other entertainment projects

Specifications

Physical

• Length: 50 mm (2.0 in)
• Width: 38 mm (1.5 in)
• Height: 6.4 mm (0.25 in)
• Antenna: Internal/Connection to External
• Construction: PCB Assembly
• Power/Data Connector: 20-Pin 2x10 0.100-inch header, male

Radio

• Frequency: 2.4GHz (5906); 900MHz (5907)
• Universes: 1
• Broadcast Power: Antenna dependent; 100mW EIRP
• Broadcast Modes: Adaptive, Full, Low, Mid, High, Max
• SHoW IDs: Multiverse: 147; Neo: 70 (5906) | Multiverse: 130 (5907)
• Latency: 4ms average
• RF Sensitivity: -95dBm
• RDM Features: RDM Proxy, RDM Responder

Product Information

• Voltage Range: 5 – 30VDC
• Outputs: Wireless DMX/RDM, 0-10V, PWM
• Configuration: City Theatrical USB Configuration program (PC/Mac)
• Use Environment: Indoor
• Warranty: One year
• Manufacturing Origin: USA
• Compliance: Pre compliance reports available for integrators